The BMW M2 is the automaker’s answer to Audi and Mercedes-Benz in the premium sport compact segment. The 2016 BMW M2 is a wolf in sheep’s clothing as it shares a lot of the M4’s technology underneath its body. From the suspension to the large 4 piston front brakes, they are all shared with the bigger brother M4. The BMW M2 does have several differences that set it apart, such as having its very own tuned dampers, springs, and hardly noticeable narrower tires. The N55 inline 6cyl turbocharged engine is spirited, sharing some DNA from the S55 engine found in the M4, cranking out a stunning 365 HP and 369 Lb. x. ft. of Torque at the crank.
aFe POWER has always had a passion for BMW’s, and that drive continues with the BMW M2. Our in-house M2 allows us to develop the latest and greatest for this platform, carefully testing each and every part in real world conditions. The aFe POWER products that were showcased at Bimmerfest 2016 were only the beginning of the full line of performance upgrades. Now we are excited to be releasing power and suspension upgrades for the all new BMW M2.
Proudly developed and crafted in the USA, aFe CONTROL has engineered lowering springs for the 2016+ BMW M2 (F87) to be optimized with the factory shock absorber dampening. We offer a 1” drop to combine the perfect balance of performance and style to eliminate that dreaded wheel gap. The lower center of gravity will inspire cornering confidence without affecting ride quality and comfort. Our aFe CONTROL lowering springs for the BMW M2 are a direct fit upgrade and require no modifications to the vehicle.
For more info CLICK HERE.
The talented engineers at aFe CONTROL have been working hard on developing coilovers for the BMW M2. We are excited to release a high-performance coilover that will increase cornering speed, without compromising ride quality. They are ride height adjustable with 24 different settings you can feel to match your driving conditions. Our coilovers provide a much more predictable ride and feel, thanks to the inverted mono-tube design and CIRC system (Concentric Integrated Remote Canister) that more than triples the amount of gas volume over a standard coilover, providing wider temperature ranges and consistent performance. This kit is a direct fit, requiring no modifications needed to install.
For more info CLICK HERE.
Coming soon! Our new aFe CONTROL Variable Height Springs! Our system gives you the benefit of maintaining your factory shocks and struts, with fully adjustable ride height capability for that perfect stance. The system features slip on coil over sleeves for the front struts that are TIG welded, and then zinc plated for maximum strength. Installation is easy, just press off the factory OE spring seat and replace it with our aFe CONTROL VHS. All mounts included for OEM accelerometers and sway bars for a seamless factory style appearance. Our aFe CONTROL Variable Height Springs allow you to lower your BMW M2 from 0.5” to 1.5,” providing that custom appearance while still maintaining that sophisticated BMW ride quality.
For more info CLICK HERE.
Debuted at Bimmerfest 2016, aFe POWER’s Momentum GT Intake combined with our Scorcher GT Tuner Module will boost your M2’s N55 engine to its maximum potential. Starting with the Momentum GT Cold Air Intake System, which will deliver improved performance and throttle response. Features include a clear sight window for easy filter inspection without disassembling the entire system. Unique (Patent Pending) Filter-to-Housing Interface allows for a quick, seamless and secure installation. Our roto-molded one-piece air box resists hot engine temperatures, while the dyno-tuned intake tube increases airflow for maximum horsepower and torque. (Performance data will be released soon)
The aFe POWER Scorcher Tuner Module will improve horsepower, torque, and throttle response by altering the pressure sensor signals to increase boost and fuel levels to an optimum point throughout the entire RPM range. Unlike other handheld tuners that will flash your vehicle’s computer, the Scorcher Tuner Module leaves no trace on the ECU. Preventing any warranty concerns you may have and is easily reversible back to stock. The installation process is very simple and usually takes 30 minutes to install with our easy plug and play system. (Performance date will be released soon)
(Performance Dyno Data Coming Soon)
We didn’t forget about the exhaust system for the M2 either, which is in the final stages of testing so you won’t have to wait too long for that renown aFe performance and sound. The M2 exhaust system is precision engineered for maximum performance and durability featuring a 3-1/2” inlet to 3” outlet, and manufactured from robust 304 stainless steel with quad polished or carbon-fiber exhaust tips. Down-pipes will be available in either our catted or non-catted versions, with hardware provided on both upgrades for a hassle-free installation.
(Performance Dyno Data Coming Soon)
(Performance Dyno Data Coming Soon)
aFe CONTROL has developed a swaybar kit for the F80 series chassis. Designed to increase roll stiffness without upsetting the M2's natural balance or traction control systems. Perfectly balanced, the 32mm front and 29mm rear bars are lightweight, made from a tubular construction, and feature CNC machined TIG welded bar ends for a perfect fit. We also include CNC machined 6061-T6 sway bar bushing brackets that are anodized black and direct fit polyurethane bushings. Anyone can provide a stiff bar, but to maintain perfect balance is crucial to increasing corner speed.
For more info CLICK HERE.
aFe CONTROL BMW M2 Lowering Springs
aFe CONTROL BMW M2 Coilovers
aFe CONTROL BMW M2 Swaybars
aFe POWER BMW M2 Intake
aFe POWER BMW M2
Scorcher Tuner Module
aFe POWER BMW M2
Exhaust & Down-Pipes
This entry was posted in aFe News, New Products and tagged M Performance, M Power, BMW Performance, M2 tuner, M2 swaybars, M2 exhaust, M2 coilovers, BMW M2 Performance, BMW M2, lowering springs, tuner module, AFE Control, aFe intakes, aFe, performance, tuner, aFe Power, BMW on September 21, 2016 by Josh Biggers.
1758 State Route 34 North, Wall Township, 07727
September 18th, 2016
FREE Admission! FREE BBQ! RAFFLE & GIVEAWAYS! ACTIVITIES FOR THE KIDS! Mark your calendar for Sunday, Sept. 18, 11 A.M. To 5 P.M. for this can’t miss event!
XDP Diesel’s Open house will gather the most wicked diesel trucks in the Northeast! Fifty of some of the most powerful diesels ever built are set to do battle in the much anticipated DYNO-Shootout for the title of MOST HORSEPOWER. Don’t Miss it!
For more info on the event - CLICK HERE
The 18th Annual Sand Sports Super Show returns to the OC Fair and Event Center in Costa Mesa, CA. The biggest Sand Sports Show in the world, featuring the latest innovations for off-road vehicles, from side by sides to the toughest off-road rigs.
Admission for adults is $15 per day and children 12 and under get in free! This show hosts a variety of aftermarket vendors including aFe POWER, presenting our latest off-road performance products. We will be offering on site show specials, so swing by Booth # 14-201 and check us out!
For more information about the show - CLICK HERE
To purchase tickets to the event - CLICK HERE
OC Fair and Event Center, 88 Fair Dr, Costa Mesa, CA 92626
September 16-18, 2016
Friday - (4 p.m. to 10 p.m.) Saturday - (9 a.m. to 7 p.m.) Sunday - (9 a.m. to 4 p.m.)
Corona, CA (August 10, 2016) - aFe POWER, renown performance aftermarket automotive products manufacturer, announces the debut of its new retail concept with the opening of the aFe POWER Performance Center in Riverside, California. Located at 11820 Magnolia Avenue, just 1.5 miles from the aFe POWER Manufacturing facilities in Corona, CA.
A unique lifestyle destination, the aFe Performance Center will provide customers the opportunity to see and touch the quality of the aFe POWER product line first hand, with the retail location featuring most of the product lines aFe manufactures, from high performance Air Filters, Air Intake Systems, Exhaust Systems, Intercoolers, Throttle Body Spacers, Turbochargers to the new aFe CONTROL Suspension Systems, Coilovers, Sway Bars as well as the new line of Sway-A-Way Off-Road Shocks and truck suspension options.
"Educating customers to the engineering details and important differences in the aFe product line is top priority for us in 2016", said Shahriar 'Nick' Niakan, CEO OF aFe POWER. "Being able to tell our story, hearing questions from consumers and enthusiasts will allow aFe to continue its passionate product development and identify new product markets."
The aFe POWER Performance Center will be open six days a week and features a large product showroom as well as providing product installation with scheduled appointments. This aFe Performance Center complements an extensive dealer network and serve to further grow the brand.
Store hours are Monday through Friday from 8 a.m. to 5 p.m. and Saturday from 9 a.m. to 3 p.m.
This entry was posted in aFe News on September 12, 2016 by Josh Biggers.
aFe POWER is known for developing performance products on diesel trucks, naturally given the opportunity to work on the new 2017 Ford F-250 the engineers jumped. You may ask yourself why the new F-250 is such a big deal, well here are several reasons why the new F series is improved for 2017.
Lightweight strength was achieved without losing structural integrity. Just like its smaller brother the F-150, the F-250 sheds some weight off with high-strength aluminum. Approximately 350 pounds were lost, but while many will doubt whether or not this truck can handle massive payloads, a stiffer frame, stronger axles and suspension components have been upgraded to compensate.
Powering this F-250 is a 6.7L Power Stroke turbo diesel V8. New engine updates helped produced an impressive 440 HP and 925 lb-ft of torque at the crank.
While stock out of the box the truck delivers admirable performance, at aFe POWER we don’t know the meaning of the word “stock”. We are the first to strap this powerful workhorse to a dyno and see what it puts down at the wheels. Future products to keep an eye out from aFe POWER is our Scorcher Tuner Module, Momentum GT Cold Air Intake System, exhaust system upgrades and more!
As mentioned before we needed to do a baseline run to see what we are working with in stock trim. We use our in-house dyno jet as a tool to visually see what performance gains our products will improve upon. In this case, we are testing our Scorcher HD Tuner Module for the 2017 Ford F-250 with the 6.7L V8 engine.
Ford's new F-250 is certainly a torque monster, producing over 800 Ft. lbs of torque to the wheels at 2,000 RPM! Obviously, that much amount of torque helps when pulling heavy loads from destination to destination. But there’s always room for improvement, the aFe POWER Scorcher HD Tuner Module will increase your Power Stroke diesels horsepower, torque and throttle response. Whether for pulling, cruising, or even hitting the local drag strip for fun, our tuner module will not leave you disappointed.
(2017 Ford F-250 Power Stroke Stock Dyno Baseline)
Unlike other handheld Tuners that will flash your trucks computer and risk voiding your warranty. Our module leaves no trace on the ECU for the dealership to pick up upon scanning, we achieve this obstacle by altering the pressure sensor signals to increase boost and fuel levels to an optimum point throughout the entire RPM range.
As with all of our Scorcher Modules, no cutting, drilling, or splicing is required for a quick and hassle-free installation. We connect to the stock wiring harness with factory connectors to ensure a seamless install. Our new generation of Scorcher Tuner Module allows you to change between power settings without having to get out of your truck.
Our Scorcher Module works with all aFe POWER upgrades, increasing their effectiveness with the additional fuel and boost for more horsepower and torque. Along with our Scorcher HD Tuner Module, we are developing other products for the 2017 Ford F-250 6.7L Power Stroke such as an intake, exhaust systems and suspension upgrades.
(2017 F-250 Power Stroke with aFe Scorcher Module Dyno)
aFe POWER Momentum HD Intake System
aFe POWER Momentum Dynamic Air Scoop
aFe POWER Momentum Scorcher Package
Updated 2/14/17: The final tuning has been completed on the 2017 Ford F-250 Power Stroke 6.7L Scorcher HD Tuning Module. +50HP and +96lbs. x ft of Torque at the wheels with just the Momentum HD Intake and Scorcher HD Module. This potent bolt-on package is available together here: Scorcher HD Power Stroke Package
This combination takes the stock Power Stroke from the rated 440HP and 925 lbs. x ft of Torque to 496HP and 1,031 lbs. x ft of Torque!
This entry was posted in aFe News, New Products and tagged Scorcher HD Module, Ford Trucks, Ford F-250, Powerstroke, tuner module, Ford Diesel, trucks, ford, Exhaust, aFe Power, Intake on September 2, 2016 by Josh Biggers.
Both aFe POWER equipped Turner Motorsport BMW’s head east to Virginia International Raceway for round 9 of the series. Turner Motorsport returns to VIR with their heads held up high as they have three wins and multiple top 13 results since 2005. Markus Palttala driver of the No. 97 Turner BMW M6 GT3 is no stranger to VIR, in 2014 he placed in 1st which later rewarded him to a 3-way tie for first in the championship standings that year. This year will be his second year driving alongside Michael Marsal, both finishing strong last year in 4th for Turner Motorsport in the BMW Z4 GT3.
When asked about their chances of winning at VIR, Markus Palttala had this to say –
“I’m looking forward to returning to ViR, it is a very fun circuit and one of my favorites here in North America. The Z4 was very strong here the past two seasons with results to show it so now it’s time to prove the performance of our new M6 GT3.”
With the Weathertech Sportscar Championship approaching the final stretch of the 2016 season, teams will be hustling to grab one final win before the series ends.Tune into Fox Sports 1 for LIVE coverage of the race on Sunday, August 28th from 1:35 PM to 4:15 PM EDT.
Location: Angel Stadium - 2000 E. Gene Autry Way, Anaheim, CA 92806
Sunday, August 14th from 10 a.m. - 5 p.m.Don't miss out on one of the biggest car shows in 2016, this is one show you certainly want to check out. The Nitto Auto Enthusiasts show goes into its 4th year hosted at the Angel Stadium in Anaheim California. Last year's event gathered over 900 show cars, 90+ vendors, and over 12,000 fans were in attendance for this show. You will see everything from classics, trucks, motorcycles, and modern performance vehicles all in one place. There is something for everyone, but if you think that's all this show has to offer to you, think again.Drifting is also one of the many attractions that make this show worth checking out. Nitto-sponsored drivers Vaughn Gittin Jr, Mad Mike Whiddett, Matt Powers, Loren Healy and Jason Blanton will be at the event demonstrating their drifting skills for the crowd. Off-road demonstrations, vendor midway, food trucks and much more will be there for the whole family to enjoy. Several members of the aFe POWER team will be in attendance with their personal vehicles participating as well.For more info on Nitto Auto Enthusiasts Day - Click Here
Nitto Auto Enthusiast Schedule
Start Times What Where
This entry was posted in aFe News and tagged Anaheim, Euro, JDM, Formula Drift, Angles Stadium, Car show, Nitto Auto Enthusiasts Day 2016, Nitto, Mopar, Ford Mustang, AFE Control, Dodge, aFe Power, Jeep, BMW on August 9, 2016 by Josh Biggers.
Round 8 of the IMSA Weathertech Championship
Sunday August 7th, 2016 at 4:00 p.m. ET
on (FS1) Fox Sports 1
Round 8 of the IMSA Weathertech Championship will be held at the renowned Road America road course in Plymouth Wisconsin. Both aFe POWER equipped Turner Motorsport BMW GT3's return in hopes of turning around their luck from last year's disappointing finish. This year Turner Motorsport returns with confidence in landing a solid performance.
Markus Palttala driver of the No. 97 Turner BMW feels that the M6's will have an advantage at Road America. He believes the tracks long sweeping high-speed corners will be better suited for longer wheelbase cars such as their M6. The team will push hard in hopes of obtaining some strong results and overcome last week's disappointing finish at Lime Rock Park.
Strategy has always played a key role at Road America in past years. With a large field of teams competing this weekend, it should be interesting to see what game plan Turner Motorsport has up their sleeve.
Cheer on both aFe POWER equipped Turner Motorsport BMW M6 GT3's this weekend! The green flag will wave on Sunday, August 7th at 4:00 p.m. EST and can be watched LIVE on Fox Sports 1. Qualifying will start on Saturday, August 6th at 3:50 p.m. ET and you can watch it LIVE as well on www.IMSA.com.
Turner Motorsports aFe POWER Equipped BMW M6 GT3 Comes Home Victorious!
Round 6 of the IMSA Weathertech Championship took place at Mosport just north of the Canadian border. The Turner Motorsport team had a solid qualifying position, as driver Bret Curtis had the No. 96 aFe POWER equipped BMW M6 GT3 starting from 4th.With a combination of quick and consistent laps, Curtis was able to keep the leaders in sight during the first half of the race. Co-driver Jens Klingmann took over the wheel in the second half of the race to reel in the leaders.
After a full course caution had been brought out by the GTD leader, this gave the team hope as it bunched up the field for another green flag restart. Klingmann took this chance to head towards the pits for four tires and fuel, preparing for the final sprint to the finish. Klingmann fought hard for several laps, resulting in taking second and first place from both the No. 33 Viper and No. 27 Lamborghini with 30 minutes to go. The result was a win for the No. 96 Turner Motorsport aFe POWER equipped BMW M6 GT3, making it their second podium of the year and the very first win for the M6 GT3 in North America.
Make sure your gas or diesel powered vehicle is equipped with race winning performance from aFe POWER!
Call our Performance Professionals at (888) 901-7693 or visit our website today at www.afepower.com
“I knew that when (team owner Will) Turner came on the radio and he said this is the fight for the lead and the win, we had a chance for the win,” Klingmann said. “(Bleekemolen) was fighting very hard, it was tough to stay close to him in [going into Turn] 5b. Just then, the traffic came towards us, and I think the Lambo was just too wide, so I tried the only way on the inside. When I got him, I had a little celebration in the car up to Turn 8, but it was short lived.“I was just managing the pace because we were running out of fuel. We did a short stop to get out in front of the Audis. I’m really proud, this is my first win in North America, and the first win for this new BMW.”
Here is what Jens Klingmann (Driver of the No. 96 BMW M6 GT3) had to say after the race -
Interview from - http://sportscarchampionship.imsa.com/
This entry was posted in aFe News on July 13, 2016 by Josh Biggers.
IMSA WeatherTech SportsCar Championship
Sunday July 3rd, 2016 at 10:00 a.m. ET
on (FS1) Fox Sports 1
Round 6 of the IMSA SportsCar Championship will take place at the famed Watkins Glen International Raceway. Both Turner Motorsport aFe POWER equipped BMW M6 GT3s will compete through an intense 6-hours of door to door racing action. This year drivers will be introduced to a newly repaved track surface which will provide high levels of grip, making for an exciting race to watch.
Here is what Markus Palttala (Driver of the Number 97 Turner Motorsport BMW M6 GT3) had to say in a interview about the new track surface -
"It was a very useful day and we made good progress," Palttala said. "The biggest difference is the added grip of the new tarmac. Our M6 liked it and handled better than in the previous rounds. We’ve had great success at Watkins Glen before. I loved the track to start with – it’s a very cool layout and has a great rhythm – but now with the new surface, it’s simply awesome."
Link to interview - Click Here
This entry was posted in aFe News on July 1, 2016 by Josh Biggers.