Magnum FORCE Stage-2 Cold Air Intake System w/Pro 5R Filter Media

54-12172 54-12172 54-12172 54-12172 54-12172 54-12172 54-12172 Flow Chart Dyno Chart
54-12172
Adds Up To:
+12%
FLOW INCREASE
+18 HP
HORSE POWER
+22 Lbs. x Ft.
TORQUE MAX GAINS
brand
Dodge Challenger/Charger/ Chrysler 300 SRT8/SRT 11-23 V8-6.4L HEMI
Part Number
54-12172
$450.45 MSRP: $536.25 $536.25
Add to Wishlist

Details

  • Dyno-Proven Gains up to +18 HP & +22 Lbs. x Ft. TQ
  • Outflows Factory Intake by 12%
  • Measured Flow: 300 CFM @ 7" H2O
  • Washable and Reusable Pro 5R Air Filter for Maximum Performance
  • Premium Hardware for Secure Installation
  • Heat-Resistant Intake Tube w/ One-Piece Heat Shield

Specifications

  • Filter Included Yes
  • Coupler Included Yes

This Stage-2 cold air intake system produces 18 max horsepower, 22 lbs. x ft. torque and out-flowed the factory intake by 12%. Included in this system is a 18-gauge, powder-coated heat shield and washable/reusable "oiled" conical air filter. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Silicone Throttle Body Adapter:
A silicone throttle body adapter is included for a durable connection and seal over the life of the intake system.

6" 360 Degree Air Filter:
A massive 360 degree round inverted top air filter is used for maximum flow and performance filtration (98.6% efficient). The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze media and is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Heavy-Duty T-Bolt Clamp:
Included in this kit is a stainless steel T-bolt clamp to insure a tight and secure installation.

Hassle-Free Installation:
aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.

Fitment Note:
This item will not Challenger or Charger models equipped with the Shaker hood.

Fitment Note with Throttle Body Spacer:
aFe POWER throttle body spacer (P/N: 46-32007) will fit with this intake but requires intake tube modification. The intake tube will need to be cut on the marked cut line.

Emissions Disclaimer:
Some or all of the applications listed are 50-state exempt, please see CARB EO# D-550-22/51 for details.

Prop 65 Warning, Cancer and Reproductive HarmProp 65 Warning, Cancer and Reproductive Harm

Be the first to review this product

Write Your Own Review
How do you rate this product?
  1 2 3 4 5
Quality
Value
Easy Install
COPYRIGHT 2024 aFe POWER