Momentum GT Cold Air Intake System w/Pro 5R Filter Media

54-72201 54-72201 54-72201 54-72201 54-72201 54-72201
54-72201
Adds Up To:
+29%
FLOW INCREASE
+18 HP
HORSE POWER
+22 Lbs. x Ft.
TORQUE MAX GAINS
brand
Dodge Challenger/Charger 11-23/Chrysler 300 11-14 V6-3.6L
Part Number
54-72201
$464.10 MSRP: $552.50 $552.50
Rating:
100 % of 100
Add to Wishlist

Details

  • Dyno-Proven Gains up to +18 HP & +22 Lbs. x Ft. TQ
  • Outflows Factory Intake by 29%
  • Computer-Designed Roto-Molded Intake Tube
  • One-Piece Sealed Housing with Air Inlet
  • Built-in Sight Window Provides Easy Inspection of Filter Without Disassembly
  • Washable and Reusable Pro 5R Air Filter for Maximum Performance
  • Unique Filter-to-Housing Interface for Easy Installation

Specifications

  • Filter Included Yes
  • Coupler Included Yes


Unique One-Piece Housing w/ Sight Window:
A custom CAD designed roto-molded housing made from heat resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. It accommodates the Hellcat headlight air inlet for 2015-2019 Dodge Challenger models only (requires scoop p/n 54-72203-S).

Roto-Molded Tube:
This system uses a computer designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. An injection molded fitting is mounted on the tube to provide a perfect connection for the temperature sensor.

Large 5-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive oval flange and is 9" tall with an inverted top. The Pro 5R performance air filter features five layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.

Premium Hardware:
Premium stainless steel T-bolt clamps and a reinforced silicone couplings are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Fitment Note:
For 2011-2014 Chrysler 300 V6-3.6L, Kit will not fit vehicle with factory HID headlights.

Emissions Disclaimer:
Some or all of the applications listed are 50-state exempt, please see CARB EO# D-550-50/D-550-22 for details.

This CARB E.O excludes the following Engine Test Groups: 2020 LCRXV03.65P3.

Prop 65 Warning, Cancer and Reproductive HarmProp 65 Warning, Cancer and Reproductive Harm

Add your review

Write Your Own Review
How do you rate this product?
  1 2 3 4 5
Quality
Value
Easy Install
COPYRIGHT 2024 aFe POWER