|
AIR INTAKE SYSTEMS
|
|
• HIGH-PERFORMANCE EXHAUST SYSTEMS FOR TODAY'S POWER-HUNGRY TRUCKS
• LET YOUR ENGINE BREATHE TO REALIZE ITS FULL POTENTIAL
• FACTORY-GRADE FEATURES AND COMPONENTS WITH AFTERMARKET PERFORMANCE
|
|
|
|
|
Bayonet hangers
|
Swaged bayonet ends lock exhaust
components into place for the most
secure installation possible. Other
manufacturers use less expensive
bent hangers that allow tubes and
parts to slide from side to side,
causing premature wear
and damage.
|
|
Welded-on hangers
|
Every hanger is thoroughly welded
on each side to ensure a stronger
connection, compared to other
manufacturers who use only inferior
floating hangers.
|
|
Band style clamps
|
Premium-quality band clamps are
used on critical joints to provide the
tightest, leak-free seal possible.
Other systems use common, less
expensive U-bolt clamps.
|
|
Mandrel bent
|
All aFe tubing is 100% mandrel-bent.
Mandrel bending ensures the tubing
maintains its shape and size,
providing smooth, unrestricted
airflow. Standard tubing can lose as
much as 20% of its diameter in
sharp bends.
|
|
AFE EXHAUST SYSTEMS ARE MANUFACTURED IN-HOUSE TO THE
HIGHEST ENGINEERING STANDARDS FOR PERFORMANCE AND QUALITY.
ALL TUBING IS 100% MANDREL BENT TO PROVIDE THE HIGHEST FLOW
POSSIBLE. EACH SYSTEM IS EXTENSIVELY DYNO AND FLOW BENCH TESTED
TO PROVIDE MAXIMUM GAINS FOR YOUR VEHICLE.
|
|
Material
|
4" 409 Stainless Tube
|
Material
|
4" aluminized steel tube
|
|
Muffler
|
8" 409 Stainless Steel
|
Muffler
|
7" aluminized steel
|
|
Clamps
|
U-bolt and band clamp
|
Clamps
|
U-bolt and band clamp
|
|
Tail-Pipe
|
1-piece
|
Tail-Pipe
|
2-piece
|
|
Tip
|
Yes (304 SS)
|
Tip
|
Not included
|
|
Install Time
|
1 hour
|
Install Time
|
1.5 hours
|
|
