Pro Series Rear Differential Cover Black w/ Machined Fins

46-70162 46-70162 46-70162 46-70162 46-70162 46-70162 46-70162
46-70162
Adds Up To:
Jeep 97-18 (Dana 44 Axles)
Part Number
46-70162
$372.75 MSRP: $443.75 $443.75
Add to Wishlist

Details

  • Constructed out of heavy-duty, durable, nodular iron
  • Dual neodymium magnetic plugs are used for maximum gear protection
  • Features recessed hardware resulting in a smooth design
  • A 1/8" NPT calibration plug is added and set to the factory fluid level for easier/quicker filling
  • Includes a fully machined groove to accept supplied O-ring for a leak free seal
  • Fits most Jeep Dana 44 front and rear axles

Specifications

  • Filter Included Yes
  • Coupler Included Yes


Bring style and protection to your Jeep's axle with aFe Power's Dana 44 differential cover. This differential cover is constructed out of durable, heavy duty, nodular iron for strength. With a smooth design, recessed hardware. The cover is powder coated black, and features machined fins and aFe Power logo. Added capacity help keep fluids cooler. A 6" deep reach magnet and a magnetic drain plug capture loose metal particles, protecting ring gears from damage. This cover comes with all necessary hardware and includes a machined O-ring groove for a tight leak-free seal.

Trail Ready:
Weighing in at a hefty 14 lbs., this cover is trail ready and is constructed from heavy duty, nodular iron for increased strength and durability, and features recessed hardware, a smooth design which reduces rock hang up protecting against impact damage.

Nodular Iron (Ductile Iron):
Constructed out of heavy duty nodular iron (Ductile Iron) for increased strength and durability.

Built-in External Fins:
Built-in external fins transfer heat from the fluid to the outside air for maximum cooling.

O-Ring Seal:
Fully machined groove to accept supplied O-ring for a leak free seal.

Magnetic Drain Plug:
This system incorporates both a magnetic drain plug and a deep-reach magnet to capture loose particles for maximum rear-end protection. Also included is a 1/8" NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.

Note:
Requires a minimum of 1.5" lift for proper clearance.

Fits:
1987-1988 Jeep Cherokee (XJ) w/ Tow Package, Rear Axle Only
1997-2006 Jeep Wrangler (TJ) Rear Axle Only
2007-2016 Jeep Wrangler (JK) Rear Axle Only (non-Rubicon Models)
2007-2016 Jeep Wrangler (JK) Front & Rear Axle (Rubicon Models)

When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Emissions Disclaimer This product does not require a CARB EO#.
Prop 65 Warning, Cancer and Reproductive HarmProp 65 Warning, Cancer and Reproductive Harm

Be the first to review this product

Write Your Own Review
How do you rate this product?
  1 2 3 4 5
Quality
Value
Easy Install
COPYRIGHT 2024 aFe POWER