This cold air intake system produced 17 max horsepower, 17 lbs. x ft. torque and outflowed the factory intake by 40%. Included in this cold air intake system kit is a 18 gauge powder-coated heat shield, a massive 8 IN tall, oil-free aFe POWER Pro DRY S filter, and a computer designed, roto-molded intake tube. This is a direct bolt-on kit and requires no cutting or drilling.
Huge Roto-Molded Intake Tube:
A large roto-molded intake tube is used to smoothly direct the increased air flow into the engine for maximum performance.
Silicone Throttle Body Adapter:
A silicone throttle body adapter is included for a durable connection and seal over the life of the intake system.
8" Tall 360-Degree Air Filter:
A massive 8" tall air filter is used for maximum filtration (99.2% efficient) and convenience (requires no oils to clean). The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic "oil-free" media and is constructed with 100% polyurethane for long life and multiple cleaning cycles.
Included in this kit is a stainless steel T-bolt clamp to insure a tight and secure installation.
aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.
This system will work with the aFe throttle body spacer (Part number 46-32007) but will require a slight modification to the intake tube.
Fitment Note with Throttle Body Spacer:
aFe POWER throttle body spacer (P/N: 46-32007) will fit with this intake but requires intake tube modification. The intake tube will need to be cut on the marked cut line.
This intake is 50-state legal for 2011-2017 models (CARB E.O Number D-550-14/19/22).