Takeda Attack Stage-2 Pro Cold Air Intake System w/DRY S Filter Media

TA-3016P TA-3016P TA-3016P TA-3016P TA-3016P TA-3016P TA-3016P TA-3016P TA-3016P TA-3016P
TA-3016P
Adds Up To:
+19%
FLOW INCREASE
+16 HP
HORSE POWER
+12 Lbs. x Ft.
TORQUE MAX GAINS
brand
Infiniti G35 07-08 V6-3.5L (VQ35HR)/G37 08-13/Q60 14-15 V6-3.7L (VQ37VHR)
Part Number
TA-3016P
$562.80 MSRP: $670.00 $670.00
Add to Wishlist

Details

This true cold air intake system's striking polished tubes stand out in the VQ's engine bay, while its custom-built 10-1/2" wide air filter (that can be seen through the front grille) provides a race-inspired look.

  • Dyno-Proven Gains up to +16 HP and +12 Lbs. x Ft. TQ
  • Outflows factory intake by 19%
  • Measured Flow: 306 CFM @ 7" H2O
  • Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
  • Unique Intake Design with Custom One-Piece Air Filter
  • Optional Splash Shield P/N: TA-3016S (Sold Separately) Protects from Direct Water Splash

Specifications

  • Filter Included Yes
  • Coupler Included Yes

Large Three Layer Performance Air Filter:
This aFe POWER Pro DRY S is a 10-1/2” tall, dual inlet, 360-degree radial flow performance air filter that was custom made to fit directly behind the front grille. It features our oil-free air filter media, with three layers of progressively finer synthetic media for maximum convenience. It provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. 

Dyno-Tuned Aluminum Intake Tubes:
This dual intake system features mandrel-bent aluminum intake tubes that maximize airflow and velocity. Its clear-coated polished finish will not oxidize, ensuring a long-lasting show quality finish.

Optional Filter Splash Shield:
A filter splash shield (PN TA-3016S) is sold seperately to protect the filter from direct water splash, resulting in longer filter life and better performance. Its secured to the filter using the air filter's included clamps.

Hassle-Free Installation:
All required hardware is included for a hassle-free installation. This kit requires removal of the front bumper but, unlike other intakes on the market for VQs, it can be installed without any trimming or modifications. Reinforced silicone couplings provide adjustability, allowing the tubes to easily sit behind the front bumper.

Emissions Disclaimer:
Some or all of the applications listed are 50-state exempt, please see CARB EO# D-550-16 for details.

Prop 65 Warning, Cancer and Reproductive HarmProp 65 Warning, Cancer and Reproductive Harm

Be the first to review this product

Write Your Own Review
How do you rate this product?
  1 2 3 4 5
Quality
Value
Easy Install
COPYRIGHT 2024 aFe POWER